Toro 41393 Operator's Manual page 23

InfoCenter Home Screen
When you start the machine, the home screen
appears, displaying the corresponding icons that
apply (i.e., the parking brake is engaged, the boom
sections are in the On position, the operator is out of
the seat, etc.).
1. Master boom-switch
indicator—on
2. Right boom-section
indicator—on
3. Target-application rate
(gpa)
4. System-pressure indicator
(psi)
Master Boom-Switch Indicator
The master boom-switch indicator displays when the
master boom is in the O
Boom-Sections Indicator
The left, right, and/or center boom sections display
when any of the boom sections are in the O
(Figure 15).
5. Tank-volume indicator (US
gallons)
6. Rinse-system indicator—on
(optional kit)
7. Agitation indicator—on
8. Spray-pump indicator—on 12. Vehicle-speed indicator
position (Figure 15).
N
position
N
Note:
The following figure is an example screen; this
screen is meant to show all of the potential icons that
could appear on the screen while operating.
Refer to the following graphic for all of the icon
meanings (Figure
Figure 15
9. Selected-application
rate/boost-rate
indicator—on
10. Operator out of seat
11. Parking-brake indicator
(mph)
Active-Application Rate
The active-application rate indicates the actual rate at
which the sprayed product is being applied
15).
Target-Application Rate
The target-application rate indicates the target
rate that the user desires when operating in the
application-rate mode
23
15).
13. Active-application rate
(gpa)
14. Center boom-section
indicator—on
15. Left boom-section
indicator—on
(Figure 15).
g034272
(Figure