Toro 41393 Operator's Manual page 25

Set Rates Screen
To access the Set Rates screen, press button 2 on
the Main Menu screen
Rates and press button 4 to select Set Rates
17).
This screen displays and allows you to set the Target
Rate, Rate 1, Rate 2, and the Boost-rate percentage.
To set Rate 1, Rate 2, or the Boost-rate percentage,
refer to the following:
1. Press button 1 or 2 until you reach the desired
rate or boost-rate percentage
2. Press button 4 to select or edit the rate.
Figure 17
3. In the screen for the selected rate, use buttons 3
and 4 to set the desired rate
Note:
You can change the rate faster by
pressing and holding button 3 or 4.
(Figure 16) until you reach Set
(Figure 17).
(Figure 18).
(Figure
Note:
buttons 1 and 2 simultaneously to select Rate 1
or press and hold buttons 4 and 5 simultaneously
to select Rate 2.
Note:
buttons 1 and 5 simultaneously to apply boost
rate.
Boost is active only as long as you hold buttons
1 and 5, then returns the set rate when you no
longer press and hold the buttons.
4. Press button 5 to exit the Set Rates screen, to
g034280
save the rate setting, and return to the Main
screen.
Settings Screen
To access the Settings screen, press button 2 on the
Main Menu screen
and press button 4 to select Settings
This screen allows you to view and change the
settings for the tank, display, boom width, and to reset
default settings.
25
Figure 18
From the home screen, press and hold
From the Home screen, press and hold
(Figure 16) until you reach Settings
g034281
(Figure 19).