Toro 41393 Operator's Manual page 34

InfoCenter Advisories
Operator advisories automatically display on the InfoCenter screen when a machine function requires additional
action. For example, if you attempt to start the engine while pressing the traction pedal, an advisory displays,
indicating that the traction pedal must be in the N
For each advisory that occurs, there is a condition (e.g., start prevent, engine stopped), an advisory code
(number), a qualifier (the cause of the advisory displayed), and a display text (what the advisory displays as text
on the screen) as shown in
1. Display text
2. Code
Note:
Advisories do not log into the fault log.
Note:
You can clear an advisory from the display screen by pressing any of the InfoCenter keys.
Refer to the following table for all the InfoCenter advisories:
InfoCenter Advisory Table
Condition
Start Prevented
Start Prevented
Start Prevented
Start Prevented
Start Prevented
Engine Stopped
Engine Stopped
Pump Start Prevented
Pump Start Prevented
Pump Start Prevented
Pump Turned Off
EUTRAL
Figure 39.
Code
2
3
4
5
6
102
103
202
203
205
206
position.
Figure 39
3. Press any key on the InfoCenter to clear the text from the
display screen.
Qualifier
Pump switch active
Not in N
EUTRAL
Out of seat
Starter engage timeout
Rinse pump active
Out of seat
Parking brake set
Boom active
Out of seat and parking brake
not set
Engine starting
Out of seat
34
Display Text
To start, turn pump off
To start, return traction pedal to
neutral
To start, must be seated or set
the parking brake
To start, rest starter
To start, turn off rinse pump
Engine stop due to operator out
of seat
Engine stop due to parking
brake engaged
To start pump, turn booms off
To start pump, must be seated
or set parking brake
To start pump, stop cranking
engine
To start pump, remain seated
g034318