Multi-Up - Xerox CopyCentre C32 Quick Reference Manual

Spode QRG.book Page 24 Tuesday, May 13, 2003 10:51 AM

Multi-Up

This feature is used to create documents with multiple images. It is ideal for creating
handouts, storyboards or documents used for archival purposes.
NOTE: Originals must be loaded in the Document Handler when using this feature.
Options:
The feature is switched off.
O
FF
Use to enable the Multi-Up feature.
O
N
Multi-Up On options are as follows:
O
RIENTATION
C
NOTE: The number of images will be limited by the minimum reduction value of
25% and the size of the selected output.
P 3-24
AGE
Use to select the image and load orientation of the input
originals.
Selects the required number of Rows, between 1 and 6.
R
OWS
Selects the required number of columns, between 1 and 6.
OLUMNS
X C C
EROX OPY ENTRE
/W C P 32/40 C
ORK ENTRE RO OLOUR
Q R G
UICK EFERENCE UIDE