Xerox 5750 Service Manual page 26

Status
Code
08-175, The control logic sensed a timing error from the registration sensor on signal while feeding from the bypass tray (08-
176, 177, 175), tray 1(08-176), tray 2 (08-177), tray 3 (08-178), or tray 4 (08-179).
178, 179
Initial action:
Check the Registration Chute for paper path obstructions and damage.
Clean the Registration Sensor (REP 5.28).
Clean the Feed, Retard, Nudger, Preregistration and Registration Rolls for the appropriate tray with a damp
cloth (water) (REP 5.22) (REP 5.24).
Clean the CTR (Charged Transfer Roll) Film with a dry cloth (REP 5.10).
If the problem still exists:
Place a service call.
08-198 The control logic sensed a timing error from the registration sensor off signal while feeding from the bypass tray.
Initial action:
Check for multiple feed of transparencies, if applicable.
Clean the Bypass Tray Feed, Retard, Nudger, Preregistration and Registration Rolls with a damp cloth
(water) (REP 5.27).
Check the Bypass Tray Retard Pad for damage.
If the problem still exists:
Place a service call.
08-380 The control logic sensed a failure of the position of the Curler Cam through the Curler Cam sensors 1 & 2.
Initial action:
Check the Curler Cam for damage and obstructions.
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-26 5750 DocuCare Service Manual