Xerox 5750 Service Manual page 19

Status
Code
06-390 The control logic sensed that the Scan Carraige did not stop in the home position.
Initial action:
Switch off the machine power.
Power the machine on.
If the problem still exists:
Place a service call.
06-391 The control logic sensed that the Scan Carraige did not initialize properly.
Initial action:
Switch off the machine power.
Wait ten seconds.
Power the machine on.
If the problem still exists:
Place a service call.
06-398 The control logic sensed a timing problem with the Scan Carraige at Start of Scan (SOS).
Initial action:
Switch off the machine power.
Wait ten seconds.
Power the machine on.
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-19 Fault Code Procedures