Adf Interlock Fault - Xerox 5750 Service Manual

Status
Code
05-340 The control logic sensed an error in the self test routine of the Ram test.
Initial action:
Switch off the machine power.
If there is other equipment close by that may be generating electrical noise or radio frequency interference,
power it off also.
Contact Building Maintenance and have them verify the proper voltage at the machine plug.
Clean and inspect all corotrons for defects and ensure they are properly installed Section 5-Repairs.
Power the machine on.
If the problem still exists:
Place a service call.
ADF The control logic has sensed a problem with the ADF interlocks.
Interlock
Initial action:
Fault
Inspect the feeder cover for any foreign material that would prevent the cover from closing correctly.
Inspect the feeder cover for damage or warping.
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-14 5750 DocuCare Service Manual