Table of Contents
Advertisement
Notes for test institutes
Energy efficiency class according to EN 60350-1
The energy efficiency rating is determined in accordance with EN 60350-1.
Energy efficiency rating: A+
Please observe the following when conducting testing:
- Testing is undertaken using the
- Only accessories that are required for testing should be in the oven
compartment during tests.
Do not use other accessories that might be available such as FlexiClip runners
or catalytic enamelled panels such as side panels or roof liners.
- An important pre-condition for determining the energy efficiency rating is that
the door is tightly shut during testing.
Depending on measurement devices used, the functioning of the door seal can
be affected to a greater or lesser extent. This has a negative impact on the test
results.
Pushing against the door will compensate for this. In certain unfavourable
circumstances, suitable technical aids may also be necessary for this. This does
not occur in normal use.
Data sheet for household ovens
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE
Model name/identifier
Energy efficiency index/cavity (EEI
Energy efficiency class/cavity
A+++ (most efficient) to D (least efficient)
Energy consumption per cycle for each cavity in conventional mode
Energy consumption per cycle for each cavity in fan-forced convection
mode
Number of cavities
Heat source(s) per cavity
Volume of cavity
Mass of the appliance
86
Eco Fan heat
)
cavity
function.
H 2455 BP, H 2457 BP
81,7
A+
1,10 kWh
0,71 kWh
1
electric
76 l
47,0 kg
Advertisement
Table of Contents
