Table of Contents
Advertisement
Problem solving guide
Problem
is lit up or flashing
in the display.
appears in the
display.
appears in the
display.
appears in the
display.
The buzzer does not
sound.
A noise can be heard
after a cooking pro-
cess.
The oven has
switched itself off.
64
Cause and remedy
There has been a power cut which has caused the
pyrolytic cleaning programme to stop.
The symbol will remain lit up and the door locked
until the temperature inside the oven drops to below
280 °C.
If you turn the operating mode selector to the
0 position, will keep flashing. Reset the time of
day (see "Settings").
The door lock for pyrolytic cleaning has not locked.
Turn the function selector to 0 and select the required
pyrolytic cleaning programme again.
If the problem persists, call the Miele Customer
Service Department.
The door lock for pyrolytic cleaning has not opened.
Turn the function selector to 0.
If the problem persists, call the Miele Customer
Service Department.
A fault has occurred that you cannot resolve.
Call the Miele Customer Service Department.
The buzzer is switched off.
Switch on the buzzer (see "Settings").
The cooling fan will continue to run for a while after the
oven has been switched off to prevent any humidity
building up in the oven, on the control panel or in the
oven housing unit.
This cooling fan will switch itself off automatically after
a certain period of time.
To save power, the oven switches off automatically if a
button is not pressed after a certain amount of time or
after a cooking programme has ended.
Switch the oven back on.
Advertisement
Table of Contents
