Table of Contents
Advertisement
A list of the models described in these
operating and installation instructions
can be found on the back page of this
booklet.
Data plate
The data plate is located on the front
frame, visible when the door is open.
The data plate states the model
number, the serial number as well as
connection data (voltage, frequency
and maximum rated load).
Please have this information to hand,
should you need to contact Miele
regarding any questions or problems.
Scope of delivery
- Operating and installation
instructions for using the oven
- Screws for securing your oven in the
housing unit
- Various accessories
Accessories supplied and
available to order
Features will vary depending on
model.
Side runners, universal tray and wire
rack (or "rack" for short) are supplied
as standard with the oven.
Depending on the model, your oven
may also come supplied with some of
the accessories listed here.
All the accessories listed as well as the
cleaning and care products are
designed for Miele ovens.
These are available to order via the
Miele Webshop, the Miele Customer
Service Department or from your Miele
dealer.
When ordering, please quote the model
identifier of your oven and the reference
number of the accessories required.
Side runners
There are runners on the left and right
of the oven compartment with
shelves for inserting accessories.
The numbers for the shelf levels are
marked on the front frame.
Each level consists of 2 rails, one above
the other.
The accessories (e.g. the rack) are
pushed into the oven between the two
rails.
You can remove the side runners (see
"Cleaning and care" – "Removing the
side runners with FlexiClip runners").
Features
19
Advertisement
Table of Contents
