Installation - Lindy IPower Switch 4 DIN S Pro User Manual

· Optional sensor for environmental monitoring (temperature, humidity and air pres-
sure)
· Firmware update via Ethernet during operation
· Comfortable configuration by web browser, W indows or Linux tool
· Generation of messages (e-mail, Syslog and SNMP traps) and relay switching de-
pending on input change, resp. external sensors
· IPv6 ready
· HTTP/HTTPS, e-mail (SSL, STARTTLS), DHCP, Syslog
· SNMPv1, v2c, v3 (Get/Traps)
· Modbus TCP Support
· Console Commands with telnet support and serial interface
· TLS 1.0, 1.1, 1.2
· IP Access Control List
· Low internal power consumption
· Developed and manufactured in Germany
1.4

Installation

1. 230V AC power supply
2. Four relay outputs (potential-free)
3. Ethernet connector (RJ45)
4. Sensor connector (RJ45)
5. Activity LED (Input) for digital inputs
6. 4 status LED for relay outputs
7. Status LED
8. Button for Select and OK
9. Alternative low power supply LV PW R (Low Voltage PoW eR)
10. Eight passive inputs (with GND ( ) for 2 inputs each)
11. Stop input (with GND ( ) to switch-off of all relais
)
5