Download Print this page

Installation - Lindy 32166 User Manual

4 port usb 2.0 & audio km switch

Advertisement

Available languages

Available languages

User Manual

Installation

Before starting the installation, please ensure that all devices are powered off.
1. Connect a USB keyboard and mouse to the USB HID ports on the rear panel of the unit.
2. If required, connect speakers or headphones to the 3.5mm audio out port on the rear panel of the
unit.
3. Using USB 2.0 A to B cables (not included, suggested max length: 3m (9.84ft)), connect 4 PCs to
the KV switches' USB PC ports.
4. If required, using 3.5mm audio cables (not included), connect the source PC's audio connection
to the KM switch's audio input ports.
5. Once all connections are made please connect the power supply and power on all devices.
6. The KM Switch registers as a Virtual HID device to the USB host.
Operation
Computer port selection can be made using the push buttons on the front panel, via hotkey commands
or via the Mouse Roaming function.
Front Panel Buttons
Press the front push button to select the appropriate port/computer.
The switching will be confirmed with a beep. Status LEDs on the front panel near each port button will
illuminate blue if the connected computer is powered on, & red if the connected computer is selected.
Depending on the configuration, only the KM ports (USB keyboard and mouse) or KM and USB 2.0
and/or audio ports are switched.
To learn more about these features, please refer to the keyboard hotkey switching options below.
Keyboard Hotkeys
Hotkey commands can be activated pressing leading code "Ctrl" + "Ctrl".
Hotkey
Leading code + "Alt"
(hold) + "Q" + "1" ~ "4"
Leading code + "Alt"
(hold) + "Q" + "0"
Leading code + "1" ~ "4"
Leading code + "0"
Leading code + "F5"
Leading code + "A"
Leading code + "F7"
Leading code + "U"
Function
Mouse Roaming On (Default), please refer to Mouse Roaming settings
below.
Mouse Roaming Off.
Switch to port 1 ~ 4.
Return to last selected port.
Bind (Default) / Unbind audio.
Force audio to follow the currently selected port.
Unbind / Bind USB 2.0 ports.
Force USB 2.0 ports to follow the currently selected port.
English

Advertisement

loading