Related Manuals for Lindy 42843
Summary of Contents for Lindy 42843
-
Page 1: User Manual
USB 2.0 AutoSwitch PRO User Manual English LINDY No. 42843 www.lindy.com © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (October 2008) -
Page 2: Package Contents
English Introduction Thank you for purchasing the LINDY USB 2.0 AutoSwitch PRO! The USB AutoSwitch PRO allows you to share a USB device between multiple computers. The USB AutoSwitch is the perfect way of sharing a printer, scanner or external storage between computers without the need for networking, perfect for home users and SOHO alike. -
Page 3: Installation
User Manual English Installation Please follow the instructions below on how to install the USB 2.0 AutoSwitch PRO for each of your computers Windows PC The following steps will allow you to install the software required to use the auto-switching functionality. -
Page 4: Operation
User Manual English 8. When you see the following message (or similar depending on which version of Windows you are using) the installation has completed and you may proceed to install the next computer. 9. Repeat steps 6, 7 and 8 for each computer you want to connect. Mac OS &... - Page 5 User Manual English Configuration To configure the AutoSwitch, right click on the icon in the system tray and select Config. The following menu will be displayed: Idle Time The idle time is the timeout (in seconds) that the AutoSwitch will wait after a task is finished and before the switch becomes available again.
- Page 6 User Manual English Switching By default the AutoSwitch will be in Auto Mode when it is connected, as indicated by the illuminated AUTO LED on the front of the AutoSwitch. To switch from Auto Mode to Manual Mode, simply press the Switch button once. Auto Mode When the switch is in Auto Mode print jobs can be sent to a connected printer regardless of whether the AutoSwitch or printer is busy.
-
Page 7: Radio Frequency Energy, Certifications
Radio Frequency Energy, Certifications CE Certification This equipment complies with the requirements relating to electromagnetic compatibility, EN 55024 and EN55022 class A for ITE, EN61000-3-2/-3 the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. -
Page 8: Recycling Information
WEEE in leggi statali in varie misure. Fare riferimento alle leggi del proprio Stato quando si dispone di un apparecchio elettrico o elettronico. Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato. LINDY No. 42843 Edition, October 2008 www.lindy.com...