Lindy IPower Switch 4 DIN S Pro User Manual page 12

Operating
Upload Firmware, Certificate or Configuration
On the Maintenance Page
select the required file with "Browse .." in the sections "Firmware Update", "SSL Certificate Upload" or "Config
Import File Upload" and press "Upload". The file is now transferred to the update area of the device and the
contents are checked. Only now, pressing the "Apply" button will permanently update the data, or abort with
"Cancel".
firmware and configuration at the same time.
may be related to the interaction of Javascript with an outdated browser cache. If a
Ctrl-F5 does not help, it is recommended that you manually delete the cache in the
browser options. Alternatively, you can test start the browser in "private mode".
Actions in Bootloader mode
If the web interface of the device is no longer accessible, the device can be put into Bootloader mode (see
chapter Bootloader activation) be executed using the GBL_Conf.exe application:
. The following functions can
· Set IPv4 address, net-mask and gateway
· Turn HTTP password on and off
· Turn IP-ACL on and off
· Factory Reset
· Jump into the bootloader (can be switched on and off)
· Restart the device
the state of the relays as long as the operating voltage is maintained.
The GBL_Conf.exe program is available free of charge on our website lindy.com
To check the network settings with GBL_Conf.exe, start the program and choose "All
Devices" in the "Search" menu. From the list select the appropriate device. The lower
part of the left half of the window now shows the current network settings of the device.
If the IP address is displayed with the default settings (192.168.0.2), either no DHCP
server is present on the network, or there could be no free IP address assigned to it.
Only one upload function can be initiated with a reboot, eg. you cannot transmit
If after a firmware update, the web page is not displayed correctly anymore, this
For devices with relays, entering or exiting the bootloader mode does not change
12