Table of Contents
Advertisement
Operating
1.5 Technical Specifications
Interfaces
Network connectivity
Protocols
Power Supply
Environment
· Operating temperature
· Storage temperature
· Humidity
Case
Measurements
Weight
1.6
Sensor
One external sensor can be connected to the IPower Control Plus IEC Pro. The
following sensors are currently available
No.
Cable length
Connector
Temperature range
Air humidity range
(non-condensing)
Air pressure range
(full)
Air pressure range
(ext)
Protection
1 x Ethernet port (RJ45)
1 x Connector for mains supply (230V AC)
1 x Connector for AC Adaptor (12V DC, 0,5A). 12V DC power
supply
12 x screw terminal with 8 inputs and 4 x GND
8 x screw terminal with 4 make contacts (230V AC 16A,
24V DC 10 A)
1 x RJ45 for external sensor
10/100 MBit/s 10baseT Ethernet
TCP/IP, HTTP/HTTPS, SNMP v1/v2c/v3,
SNMP traps, Syslog, E-Mail (SMTP)
internal power supply (230V AC)
alternative: 10V to 24V AC, 12V to 28V DC (at 4 watts of
power)
0°C to 50°C
-15°C to 60°C
10% to 85%
plastics black
105mm x 70mm x 90mm (L x H x D)
approx. 300g
32638
2m
2m
RJ45
RJ45
-20°C to +80°C at
-20°C to +80°C at
±2°C (maximum)
±2°C (maximum)
and ±1°C (typical)
and ±1°C (typical)
-
0-100%, ±3%
(maximum) and
±2% (typical)
-
-
-
-
IP68
-
32633
32634
2m
RJ45
-20°C to +80°C at
±2°C (maximum)
and ±1°C (typical)
0-100%, ±3%
(maximum) and
±2% (typical)
± 1 hPa (typical)
at 300 ... 1100
hPa, 0 ... +40 °C
± 1.7 hPa (typical)
at 300 ... 1100 hPa,
-20 ... 0 °C
-
7
Advertisement
Table of Contents
