Configuration
3.2
Input Ports
Choose Input port to configure: This field is used to select the input port to be con-
figured.
Name: You can assign a name up to 15 characters for each of the Input Ports. Using
the name, an identification of the the device connected to the port can be facilitated.
Inverted Input: Inverts the assignment of the input signal to a logical HI / LOW state.
Input HI Text Message: Text display in the control panel and messages when a HI sig-
nal is present at the input port.
Input LOW Text Message: Text display in the control panel and messages when a
LOW signal is present at the input port.
Enable input events: Enables Input Port monitoring.
Message Channels: Enables the generation of messages on different channels.
On input is HI: Switching action when Input Port changes from LOW to HI.
On input is LOW : Switching action when Input Port changes from HI to LOW .
21