Operating; Operating The Device Directly - Lindy IPower Switch 4 DIN S Pro User Manual

Table of Contents

Operating

2.1

Port Switching

The current status of the output is indicated by the color of the LED. A red LED indic-

ates that the output is off, green shows that the output is on. On the device are the but-

tons "select" and "ok". If you press "select", the LED will blink for the first output, ie the

output is selected. Press "select" again to select the next output. Hold down the button

"ok" for two seconds, then the status of the selected output is toggled.

Status-LED

The Status LED shows the different states of the device:

· Red: The device is not connected to the Ethernet.

· Orange: The device is connected to the Ethernet and waits for data from the DHCP

server.

· Green: The device is connected to the Ethernet and the TCP/IP settings are alloc-

ated.

· Periodic blinking: The device is in Bootloader mode.

Table of Contents

32662