Installation - Lindy 32810 User Manual

User Manual

Installation

Front & Rear Panel
Before starting the installation, please ensure that all devices are powered off.
1. Connect an HDMI monitor to the HDMI OUT port with an HDMI cable.
2. Connect USB Keyboard, Mouse and device to the designated USB ports on the front panel of the
unit.
3. Connect speakers and a microphone to the 3.5mm audio ports on the front panel of the unit.
4. Connect up to four HDMI sources to the PC ports on the rear panel with HDMI cables.
5. Connect the USB Type B PC ports on the rear panel to USB ports of PCs with USB 2.0 Type A to B
cables.
6. Once all connections are made please connect the power supply to the DC/5V port and power on all
devices.
Operation
This KVM switch features two methods of switching between sources: push button & hotkeys.
Front Panel Push Button
Press the Select button on the front panel for manual switching. The switching will be confirmed by a
beep and the status LED of the active port will illuminate. To turn off the beep signal, please refer to the
keyboard hotkey switching options below.
Audio Control
Speakers or headphones and a microphone can be connected to the 3.5mm audio ports on the front
panel. Audio functionality can be activated by pushing the on/off button near the audio ports. The status
LED will light up when this function is activated.
Keyboard Hotkeys
Hotkey commands can be activated by pressing the leading code "Right Ctrl" + "Right Ctrl".
Hotkey
Leading code + "1", "2",
"3" or "4"
Leading code + "s"
Function
Computer port selection 1, 2, 3 or 4.
Turn on/off auto scanning (10 seconds default).
English