Freestanding Installation - Follett Champion 7 Installation Manual

Freestanding Installation

1. 3" (7.62 cm) on each side of dispenser, 2" (5.08 cm) behind for
electrical/water connection/ventilation (Fig. 3).
2. Rough-in the electrical service and water line.
§ Electrical: 115 V, single phase, 15A dedicated receptacle required. The
dispenser has an integral 8 ft (2.4 m) cord and plug.
§ Water: supply line (with shut-off valve) connects to the dispenser's
1/4" OD tube quick connect.
3. If installing optional 6" Leg Accessory (item# 00956318), tilt or lay
base stand on side and screw each leg into stand (Fig. 4).
4. Remove four plastic, thread-protecting plugs from bottom of
dispenser.
5. Attach dispenser to base stand with supplied hardware (Fig. 5).
NOTICE!
If installing optional Drip Tray Drain Kit, refer to instructions
included with the Drip Tray Drain Kit.
10 Champion Dispenser and Ice Machine - 115 V
Fig. 3
freestanding models
minimum 3" (7.6 cm)
clearance required
Fig. 4
Fig. 5
X4