Table of Contents
Advertisement
Quick Links
Horizon Elite
H_D710ABT, H_E710ABT, H_C1010ABT, H_C1010WBT, H_E1010ABT, H_E1010WBT,
H_C1410ABT, H_C1410WBT, H_E1410ABT, H_E1410WBT,
(See model number configurator on page 2 for details.)
Order parts online
www.follettice.com
Ice Machine Installation Instructions
™
to Ice Storage Bin Top-mount Applications
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
self-contained
01113307R05
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Follett Horizon Elite H D710ABT Series
Summary of Contents for Follett Horizon Elite H D710ABT Series
- Page 1 Horizon Elite Ice Machine Installation Instructions ™ to Ice Storage Bin Top-mount Applications H_D710ABT, H_E710ABT, H_C1010ABT, H_C1010WBT, H_E1010ABT, H_E1010WBT, H_C1410ABT, H_C1410WBT, H_E1410ABT, H_E1410WBT, (See model number configurator on page 2 for details.) Order parts online www.follettice.com self-contained 801 Church Lane • Easton, PA 18040, USA Toll free (877) 612-5086 •...
- Page 2 Chewblet Ice Machine Model Number Configurations ® 1810 Application Configuration Icemaker Voltage Series Condenser MC Maestro™ C 208-230/60/1 (icemaking head) 425 up to A Air-cooled, self-contained V Vision™ S RIDE™ Self-contained only. 425 lbs Chewblet ® W Water-cooled, self-contained H Harmony™ (RIDE remote D 115/60/1 (icemaking head) (193 kg)
-
Page 3: Table Of Contents
Contents Unpack ....................................4 Unpack Ice Machine ..............................4 Site Preparation ................................5 Installation site requirements .............................5 Docking Assembly Installation .............................6 External Connections ..............................7 Ice Transport Tube Installation ...........................7 Air-cooled ice machines only .............................8 Water-cooled ice machines only ..........................8 Internal Connections ..............................10 Ice transport tube .............................. -
Page 4: Unpack
Unpack Carefully unpack and inspect the contents of your Follett ice machine. Unpack Ice Machine ➋ ➌ ➊ ➎ ➍ 7/16" DO NOT TILT ICE MACHINE TO ACCESS BOLTS! COMPRESSOR DAMAGE 7/16" WILL RESULT ➐ ➏ BIN • TOP-MOUNT Horizon 710/1010/1410... -
Page 5: Site Preparation
Site Preparation Provide drainage, potable water supply and electrical power to within 6 feet (2m) of ice machine in accordance with local and national codes. Outdoor installation is not recommended and will void warranty. Installation site requirements ➍ 3/8" chassis drain must be used Minimum 8"... -
Page 6: Docking Assembly Installation
Docking Assembly Installation WARNING! § Prior to installing the docking assembly, ensure that the drain fitting is oriented (right or left) correctly for your installation. An optional straight drain fitting is also supplied. You may need to remove the back panel of the docking assembly in order to re-orient or change the drain fitting. -
Page 7: External Connections
External Connections Ice Transport Tube Installation Hot Water 160 F (71 C) ➊ ➋ ➌ § Install supplied ice transport tube insulation. ➊ § Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers before making connection to ease assembly. -
Page 8: Air-Cooled Ice Machines Only
Air-cooled ice machines only Water-cooled ice machines only ➊ ➊ ➋ ➏ ➋ ➐ ➌ ➌ Minimum 8" ➏ radius Minimum 8" ➑ radius 2 ft. x 1" OD 2 ft. x 1" OD silicone tubing silicone tubing 3/4" barb x 3/4" FPT 3/4"... - Page 9 Chassis drain plumbing - required § Plug must be removed from John Guest fitting. § Route 3/8" drain tubing through knockout in back of docking station and insert fully into John Guest fitting connection at the rear of the machine chassis. Route other end of 3/8"...
-
Page 10: Internal Connections
Internal Connections Air-cooled ice machines – follow steps 5.1 through 5.5. Water-cooled ice machines – follow steps 5.6 through 5.12. Ice transport tube Water solenoid, shut-off valve, and potable water line options 5.2.1 If water solenoid is already mounted to evaporator: 1. -
Page 11: Tds Switch
TDS switch Cooling Lines HIGH CLEAN § Set the TDS switch on the elctrical box. § Install ice machine cooling water lines to docking assembly. – HIGH: for extended service life – LOW: for low-scale water Ice transport tube Water solenoid, shut-off valve, and potable water line options 5.8.1 If water solenoid is already mounted to... -
Page 12: Cooling Lines And Power
5.10 Cooling lines and power Power cord ➋ ➊ § Remove twist tie. ➊ § Connect cooling water lines to ice machine § Carefully pass plug through opening and plug into (Water "Out" connects to water regulator.) wall outlet. § Water valve is set at the factory. DO NOT remove ➋... -
Page 13: Front Cover
Front Cover Install front cover to ice machine. ➊ ➋ § Slide ice machine cover over machine, ensuring that tabs on back of cover slip under louvers on back ➊ of docking assembly , then tighten two screws through cover. ➋... - Page 14 BIN • TOP-MOUNT Horizon 710/1010/1410...
- Page 15 BIN • TOP-MOUNT Horizon 710/1010/1410...
- Page 16 Maestro, Micro Chewblet, Vision, Harmony, Ice Manager, Horizon, Horizon Elite are trademarks of Follett Products LLC. Chewblet, RIDE, Follett are registered trademarks of Follett Products LLC. 801 Church Lane • Easton, PA 18040, USA Toll free (877) 612-5086 • +1 (610) 252-7301 01113307R05 www.follettice.com...
Need help?
Do you have a question about the Horizon Elite H D710ABT Series and is the answer not in the manual?
Questions and answers