Media Modules - Siemens SIMATIC NET RUGGEDCOM RST2228 Equipment Manual

Communication ports
3.1 Media modules
•
•
•
•
3.1

Media modules

Media modules extend the functionality of the device by adding new ports and/or
features. All ports and associated features are instantly available via RUGGEDCOM
ROS upon the next reboot.
Available modules
A variety of modules are available for use with the RUGGEDCOM RST2228.
For more information, refer to the
[https://support.industry.siemens.com/cs/ww/en/ps/24744/man].
Requirements/restrictions
Note the following restrictions:
Copper Ethernet modules
Fiber Optic Ethernet modules
Installing/removing media modules
Contamination hazard – risk of equipment damage
Prevent the ingress of water, dirt, and other debris that may lead to premature
equipment failure. Always make sure slots are not left empty and open ports are
protected with plugs or covers.
Required tools/hardware
Torx T10 screwdriver
38
If a module/SFP needs to be handled, the body of the person involved must first
be electrostatically discharged and grounded.
Do not bring modules/SFPs in contact with electrically isolating materials such as
plastic film, isolating table top pads, or clothing made of synthetic fibers.
Place the modules/SFPs only on conductive surfaces.
Pack, store, and transport modules/SFPs in conductive packaging only, such as
metalized plastic or metal containers, conductive foam, or household aluminum
foil.
Module type
CAUTION
Hardware
"RUGGEDCOM Modules Reference Manual"
Quantity
1 For removing/installing modules.
Equipment Manual, 10/2023, C79000-G8976-1359-19
Maximum allowed
6
6
Detail
RUGGEDCOM RST2228