Siemens SIMATIC NET RUGGEDCOM RST2228 Equipment Manual page 56

2.
3.
4.
Installing the CLP
To install the CLP, do the following:
1.
RUGGEDCOM RST2228
Equipment Manual, 10/2023, C79000-G8976-1359-19
1
CLP
1
Protective cover
2
Figure 4.2 Removing the CLP
Remove the CLP from the slot. If necessary, insert a standard screwdriver
1
between the bottom edge of the CLP and the device to move the CLP forward.
Insert the protective cover
dirt.
[Optional] Restart the device.
Power down the device.
1
Protective cover
1
2
or a new CLP to prevent the ingress of dust and
2
2
Device management
4.4 Inserting/removing the CLP
47