Wall Mounting; Installation Of Modular Devices; Installation And Removal Of Media Modules - Siemens SIMATIC NET SCALANCE X-300M Compact Operating Instructions

Industrial ethernet switches

Hide thumbs Also See for SIMATIC NET SCALANCE X-300M:

Table of Contents

5.5.3

Wall mounting

1. For wall mounting, use suitable mounting fittings for the wall

(for example, for a concrete wall, four plugs 6 mm diameter and 30 mm long, 4 screws 3.5

mm diameter and 40 mm long).

2. Connect the electrical cable connecting cables.

3. Fit the connectors for the signaling contact.

4. Insert the terminal blocks into the sockets on the IE Switch X-300.

Note

For more exact dimensions, please refer to the section "Dimension drawings".

Note

The wall mounting must be capable of supporting at least four times the weight of the

IE Switch X-300.

Note

For wall mounting of a rack device (R), use suitable fittings and mount the device as shown

in the drawing.

5.6

5.6.1

Connecting media modules and SFP transceivers

NOTICE

Use only approved SFPs

If you use components not approved by Siemens AG, in particular SFPs, Siemens cannot accept

any responsibility for the correct functioning of the "Ethernet switch system" according to the

specification.

Moreover, if components are used that have not been Siemens approved, Siemens cannot

vouch for their compatibility or for risk-free use of these components.

SCALANCE X-300M

Compact Operating Instructions, 05/2023, A5E02630801-14

Installation and disassembly

5.6 Installation of modular devices

Table of Contents

Simatic net scalance x308-2m Simatic net scalance x308-2m ts