Parts And Accessories - Siemens SIMATIC NET RUGGEDCOM RST2228 Equipment Manual

Introduction
1.6 Parts and accessories
M3.5 (#6) ring tongue
Braided or equivalent ground wire
1.6

Parts and accessories

Parts and accessories, including removable media, kits, cables, and other
components, are available through the
selector.automation.siemens.com].
Media modules
Available media modules are listed in the
[https://support.industry.siemens.com/cs/ww/en/ps/24744/man].
SFP transceivers
Available SFP transceivers are listed in the
Manual
Mounting kits
RUGGEDCOM RST2228 rack
mounting kit
Terminal blocks
RUGGEDCOM RST2228 power
supply terminal plug connector
kit
14
Tools
[https://support.industry.siemens.com/cs/us/en/ps/29769/man].
Component
Component
Quantity
4
1
RUGGEDCOM Selector [https://ruggedcom-
RUGGEDCOM Modules Reference Manual
RUGGEDCOM SFP Transceivers Reference
Description
Mounting kit for 48 cm (19 in)
rack or panel mounting.
Description
Kit containing European-style
(Euroblock) terminal blocks,
including one 7 POS terminal
block for main power and one 5
POS terminal block for Failsafe
Alarm Relay.
Detail
European-style (Euroblock) or screw-
type terminal block plug.
Additional plugs are also available for
purchase. For more information, refer
to "Parts and accessories" (Page 14).
For connecting wires to a screw-type
terminal block plug or the chassis
ground connection.
Except for the chassis ground
connection, the ring tongue must have
short insulated ring terminals with a
minimum distance of 5 mm (0.2 in)
from the ring center to the insulation.
For grounding the device to safety
Earth.
Article number
6GK6000-8MA01-0AA0
Article number
6GK6000-8HC05-0AA0
RUGGEDCOM RST2228
Equipment Manual, 10/2023, C79000-G8976-1359-19