Siemens SIMATIC NET RUGGEDCOM RST2228 Equipment Manual page 13

Introduction
1.2.1 Article number
C
G
N
Manufacturing modification options
0
1
Service panel options
A00
A01
Slot 1 options
B00
B01
B02
B05
B06
B10
B11
B40
Slot 2 options
C00
C01
C02
C05
C06
C10
4
Option
HI voltage (88-300 VDC/86-264 VAC)
12 VDC
No power supply module
Option
None
Conformal coated
Option
LED panel mounted on the front (connector side)
LED panel mounted on the back (heatsink side)
Option
RUGGEDCOM RMM2931-4 (Blank Module)
RUGGEDCOM RMM2973-4RJ45 ( 4 x RJ45, 10/100/1000 BASE-TX)
RUGGEDCOM RMM2973-4FC (4 x FastConnect (RJ45), 10/100/1000 BASE-TX)
RUGGEDCOM RMM2942-4LC2 (4 x 100MBit/s LC-interface, Optical: 100BASE-FX,
Multi Mode fiber optic up to 2 kilometer, 1310nm)
RUGGEDCOM RMM2972-4SFP (4 x SFP-slot, Supporting 100BASE-FX, 1000BASE-X
SFPs, SFPs are not included)
RUGGEDCOM RMM2973M-4RJ45 (4x RJ45 with MACsec, 10/100/1000 BASE-TX)
RUGGEDCOM RMM2972M-4SFP (4x SFP-slot with MACsec, Supporting 100BASE-FX,
1000BASE-X SFPs, SFPs are not included)
RUGGEDCOM RMM2972-2RNA to support HSR/PRP functions; port A and B, 2 x
100/1000 Base-X SFPs (SFPs are not included)
Option
RUGGEDCOM RMM2931-4 (Blank Module)
RUGGEDCOM RMM2973-4RJ45 ( 4 x RJ45, 10/100/1000 BASE-TX)
RUGGEDCOM RMM2973-4FC (4 x FastConnect (RJ45), 10/100/1000 BASE-TX)
RUGGEDCOM RMM2942-4LC2 (4 x 100MBit/s LC-interface, Optical: 100BASE-FX,
Multi Mode fiber optic up to 2 kilometer, 1310nm)
RUGGEDCOM RMM2972-4SFP (4 x SFP-slot, Supporting 100BASE-FX, 1000BASE-X
SFPs, SFPs are not included)
RUGGEDCOM RMM2973M-4RJ45 (4x RJ45 with MACsec, 10/100/1000 BASE-TX)
Description
Description
Description
Description
Description
Equipment Manual, 10/2023, C79000-G8976-1359-19
RUGGEDCOM RST2228