Table of Contents
Advertisement
1.XBee‐PRO® 900 OEM RF Modules
Key Features
Downloaded from
Elcodis.com
electronic components distributor
The XBee-PRO® 900 OEM RF Modules were engineered to support the unique needs of low-cost,
low-power wireless sensor networks. The modules require minimal power and provide reliable
delivery of data between remote devices.
The modules operate within the ISM 900 MHz frequency band.
High Performance, Low Cost
• Indoor/Urban: up to 450ft (140m)
• Outdoor line-of-sight: up to 1.8 miles (3 km)
• Transmit Power Output: 50 mW (+17dBm)
• Receiver Sensitivity: -100 dBm
• RF Data Rate: 156.25 kbps
Advanced Networking & Security
• Retries and Acknowledgements
• Point-to-point, point-to-multipoint
and peer-to-peer topologies supported
• Self-routing, self-healing mesh networking
Worldwide Acceptance
FCC Approval (USA) Refer to Appendix B for FCC Requirements.
Systems that contain XBee-PRO® 900 RF Modules inherit Digi Certifications.
ISM (Industrial, Scientific & Medical) 900 MHz frequency band
Manufactured under ISO 9001:2000 registered standards
XBee-PRO® 900 RF Modules are optimized for use in US, Canada, (contact Digi for
complete list of agency approvals).
© 2008 Digi International, Inc.
Low Power
XBee-PRO® 900
• TX Current: 210 mA (@3.3 V)
• RX Current: 80mA (@3.3 V)
• 60 uA typical cyclic sleep.
Easy-to-Use
• No configuration necessary for out-of
box RF communications
• AT and API Command Modes for
configuring module parameters
• Small form factor
• Extensive command set
• Free X-CTU Software
(Testing and configuration software)
4
Advertisement
Table of Contents
