Receiving A Query; Secure Operations; Selecting Secure Transmissions; Selecting Clear Transmissions - Motorola APX 5000 3 User Manual

The display shows the Send Message screen and Sending msg.
If the message is sent, you hear a tone and the display shows Msg sent.
If the message is not sent, you hear a low tone, the display shows Send failed and returns to
the main TMS screen.
NOTE: The server responds to your query with the required report in text messages.
You can append a priority status and/or a request reply to your message. See
Status and Request Reply for New Text Messages on page 86
7.18.3

Receiving a Query

When and where to use:
The information requested is received in TMS format.
When you receive a query, you hear a unique, high-pitched chirp and the display shows the message
icon flagged with "Priority". The display shows momentary New msg.
Procedure:
To access the Inbox, press and hold the Data Feature button or the preprogrammed TMS
Feature button or press the Menu Select button directly below TMS.
The display shows a list of aliases or IDs, with the sender of the latest received message on top.
7.19

Secure Operations

Secure radio operation provides the highest commercially available level of voice security on both
trunked and conventional channels.
By default, the radio automatically enters the encrypted environment without having to manually select
or clear the secure transmission.
7.19.1

Selecting Secure Transmissions

Procedure:
Turn the preprogrammed Secure/Clear switch to the secure position.
• If the selected channel is preprogrammed for clear-only operation, when you press the PTT
button, you hear an invalid mode tone and the display shows Clear TX only.
• The radio does not transmit until you set the Secure/Clear switch to the clear position.
• If the "Ignore Secure/Clear Switch when Strapped" programming option is enabled, the radio
transmits without displaying any messages in the strapped mode of operation, regardless of
the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio
technician.
• The Secure/Clear switch only applies when the radio is transmitting.
7.19.2

Selecting Clear Transmissions

Procedure:
Turn the preprogrammed Secure/Clear switch to the clear position.
68012002065-HW
Chapter 7 : Advanced Features
Priority
for more information.
95