Table of Contents
Advertisement
68012005050-FY
Chapter 7: Advanced Features
If adequate signals from multiple satellites are available, your GPS feature only provides an approximate
location, usually within 10 meters from your actual location, but sometimes farther away.
Sometimes, the GPS feature cannot complete a location calculation successfully. You will then see a
message indicating that your radio cannot connect to enough visible satellites.
To maximize the ability of your radio to determine a fix, take note of the following guidelines:
●
For your initial fix, hold the radio in the face position.
●
Stay in the open as the GPS feature works best when there is nothing between your radio and the open
sky.
7.13.1
Location Format
This feature allows you to select different display formats of GPS location.
The following GPS location formats are available:
●
Lat/Long (DD)
●
Lat/Long (DDM)
●
Lat/Long (DMS)
●
UTM/UCS
●
SLD99
●
MGRS
NOTE: When you send your location to another radio, the receiving radio displays the location in its
selected format.
7.13.2
Location Feature in Emergency Mode
When the Emergency feature is activated, the radio exits the Location menu and returns to the Home screen.
You can view the channel that triggers the emergency signal.
You can reenter the Location menu while still in Emergency mode as long as Silent Emergency is not
activated.
If you have disabled the Location feature on your radio, it automatically turns back on when Emergency mode
is activated.
If there is a solid location signal during Emergency operation, the current location and the location information
received is saved as Emergency and Last Known Location respectively.
7.14
Mission Critical Geofence (ASTRO 25 Trunking)
This feature allows your radio to use the Global Positioning System (GPS) receiver to determine its location
at frequent intervals, and evaluate if the radio is within the Geofence area in real time. Geofence is a virtual
perimeter based on the GPS to define a geographical area on earth.
When your radio enters the predefined Geofence area, your radio receives the Dynamic Regroup command
from the system, and immediately connects to a Dynamic Regroup talkgroup. The radio display shows
the new selected Dynamic Regrouped talkgroup with green intelligent light for your attention. Voice
Announcement is also available to support this feature.
62
Advertisement
Table of Contents
