VWR ILCO 180 Premium Instruction Manual page 44

Only one type of network can be active.
After changing the network type, it may be necessary to restart the unit.
LAN settings (Figure 45)
•
IP – the incubator's IP address
•
Mask – an Ethernet network mask to which the incubator is connected
•
Gate – Server's IP address or router's that manages the Ethernet network
•
DNS – IP address of the domain name system
•
MAC – the address of the network card, read-only
•
DHCP – you can select if the server that allocates IP addresses is running on the local network. You can then skip
setting IP, Masks, Gates
A
Icon indicates the connection status.
Incubator connected
Incubator disconnected
Confirms and saves changes
Cancels the entered changes
WiFi settings (Figure 46)
•
– press to refresh network list
•
SSID – press to select network from the drop down list
•
PSK – network password
•
IP, Mask, Gate, DNS – automatically completed when the network connection is correct
•
MAC – the address of the network card, read-only
44 vwr.com I Instruction manual VWR
Figure 45 - LAN settings
A
® CO incubator
2