Table of Contents
Advertisement
Getting started
Internal memory
It may be necessary to use the data from the external memory – a USB stick. The USB stick should be formatted the FAT 32 file
system. The USB stick should be placed in USB slot located on the front the unit, near to the display. Wait a few seconds,
the correct reading is indicated by the message „USB flashdrive connected" at the bottom of the screen.
USB slot is used to connect a flash memory – a USB stick. Connecting other units (external hard
drives) is not authorized by the manufacturer and may damage the USB slot.
First boot
During the first boot, the screen
Control Software and instruction manual) on a USB stick. Insert the USB stick (not included) and wait a second to detect
the hardware, then press
start. You can tick „Don't show again" so that the window will not be displayed when you start.
You can always download the "Download" folder in the information panel. More information,
Using the keypad
When operating the unit, it is sometimes necessary to enter alphanumeric characters (e.g. when logging in to the system, entering
the user's name, etc.). In such cases, the keypad
are symbols corresponding to the computer keyboard.
Figure 9 - Alphanumeric keypad
A
22
vwr.com I Instruction manual VWR
(Figure 8)
will display proposing to save the "Download" folder (folder includes Premium
. By pressing
you quit downloading the folder, the window will appear again during the next
Figure 8 – Manual download
(Figure 9)
®
CO
incubator
2
appears on the display screen. In addition to the standard letters, there
10.7.
Info.
B
Advertisement
Table of Contents
