Huawei MTS9300A Installation Manual page 26

Hide thumbs Also See for MTS9300A:

Table of Contents

MTS9300A Telecom Power (Claro, Colombia,

MTS9304A-AM10A1)

Installation Guide

Step 2 Take out the flat washer and replace the flat washer on the original expansion

sleeves.

Figure 3-4 Replacing the flat washer

Step 3 Drill holes to a depth of 50 mm to 55 mm using a hammer drill.

Step 4 Partially tighten each expansion bolt, place it vertically into the hole, and use a

rubber mallet to hammer it in until the expansion sleeve completely enters the

hole.

Step 5 Partially tighten the expansion bolts.

Step 6 Remove the bolts, spring washers, and flat washers.

Figure 3-5 Drilling holes and installing expansion sleeves

(1) M12 bolt

(4) Expansion sleeve

----End

Issue 01 (2021-05-30)

(2) Spring washer

(5) Expansion nut

3 Installing a Cabinet

(3) Flat washer

(6) Concrete floor

Table of Contents

Mts9304a-am10a1