Table of Contents
Advertisement
4.4 Data management
Note
The data saved can be displayed with the aid of a PC / Laptop and the software
PRIMEDIC
diagnostic purposes or for therapy for the patient. It should only be used for
administrative or legal purposes. In the software there is a deployment protocol into
which further patient data can be entered.
The data saved on the SaveCard should be filed externally after every deployment if
possible. If the memory capacity of the SaveCard is full, then no further data will be
saved. The device is ready for use both with an exhausted memory and also without a
SaveCard.
Operating the software is described separately.
The SaveCard supplied with the device is already formatted and can be used straight
away. If you have any problems with the available SaveCard or new CF cards, you
have to format them with the FAT16 file system. Therefore, when you are formatting,
ensure that you do not accidentally transfer the FAT32 file system onto a Windows XP
system.
To attain the greatest possible degree of safety here, please proceed as follows:
Windows 2000, Windows XP, Windows Vista
Operating instructions
20
The device automatically records all the data on a removable SaveCard and
also records all noises in the surroundings via a microphone.
TM
ECG Viewer (optional accessory). However, this data may not be used for
Start a command line window using "Start->Run" and in the entry field, enter
"cmd.exe". The command line window will then open.
There you enter the following: format f: /U /FS:FAT /X /V: (where f: stands for
the drive letter of the of the CF card reading device which you may have to
adjust).
HeartSave PAD 22289 / GB / C
Advertisement
Table of Contents
