Ablerex ARES User Manual page 16

ARES UPS User Manual
Self-Test (Line mode only)
This function is for checking battery capacity of battery pack in AC mode. It will perform backup mode test
for 10 seconds after receiving self-test command by front panel. You can press Function key
page key and then previous page key
change as following figures.
Beep Codes
The following table contains common UPS statuses with their beep codes.
UPS Status
UPS faulty, Inverter shut down. All functions inhibited.
Control keypad error
UPS faulty, loads continue to be supplied via Inverter or
Bypass.
In battery mode
Battery low
Confirm RS-232 port receiving
Service mode okay
16
to perform the 10 seconds self-test. The LCD2 screen will
Beep Code
Long Continuous Beep
Long Continuous Beep
Single beep every two seconds
Single beep once per second
Quick and short successive beeps
Two quick and short beeps
One quick and short beep
, next