Ablerex ARES User Manual page 15

ARES UPS User Manual
W
Output Voltage Adjustment (-6.0V ~ +6.0V)
UPS Default Settings and their alternatives
Make sure the UPS is not "On". Press the on
mately three seconds. The buzzer will sound twice, and the LCD will display figure Q1, indicating that the
UPS is in setting mode.
To scroll through the options refer to section 3.3.1.5
Except for Buzzer (figures Q1 and Q2) and Self-test (figures R1 and R2) all of the other default settings may
be changed by pressing the scroll up
Figures S1 and S2 indicate the bypass input acceptable window. It follows the inverter output voltage.
(i)Bypass Sensitivity Low: many selectable output voltages±15% and (ii) Bypass Sensitivity High: many
selectable output voltages±10%.
Figure T indicates the bypass frequency window of the Inverter Output. The acceptable setting values are
±3 Hz and ±1 Hz.
Figure U indicates the acceptable Inverter Output Voltage. The settable values are 200, 208, 220, 230,
240 VAC.
Figures V1, V2, V3 and V4 indicate the operation modes of the UPS. The settable values are Online, Eco
(Economical) mode, fixed 50 Hz Output, and fixed 60 Hz Output.
Figure W indicates the adjustment of the Inverter Output, which may be set to -6.0V ~ +6.0V.
After settings is changed, scroll to the "End" screen and then press the enter
changes.
Turn off the Utility Input breaker.
The setting changes is now completed.
Turn UPS off
1. Line mode(AC input available) : Press Off key
shut off. UPS will stay in standby mode, fan(s) keep spinning and battery will be remained recharging if
AC input still available after output is off, otherwise it will be shutdown completely.
2. Backup mode (AC input not available): Press Off key
will shut off. 10 seconds later, fan stop spinning and UPS shutdown completely.
figure W (Output Voltage Micro Tune Value)
N
and scroll down
key.
* Press the Enter key to save changes
and hold until twice beeps heard, UPS output will
keys simultaneously for approxi-
key to save all of your
and hold until twice beeps heard, UPS output
15