Ablerex ARES User Manual page 14

ARES UPS User Manual
UPS Default Data and Special Function Execution
After the UPS completely starts up, press the
key to scroll through the UPS setting pages. The LCD will display in sequence figure Q1~W.
Q1
Buzzer "On"
R1
Self-test is not "On".
S1
Bypass Voltage is adjusted to wide range.
figureT (Output Frequency Synchronization Window)
T
Frequency Window is +/-3 Hz.
V1
The UPS is operating in "normal mode".
V3
The UPS is operating in "CVCF 50 Hz mode".
14
key to change the LCD display to figure Q1. Press the
figure Q1,2 (buzzer)
Q2
figure R1,2 (Self-test)
R2
figure S1,2 (Bypass Voltage Windows)
S2
U
figure V1~4 (UPS Operation Mode)
V2
V4
Buzzer "Off"
Self-test is "On".
Bypass Voltage is adjusted to narrow range.
figure U (Inverter Output Voltage)
Inverter output voltage
The UPS is operating in "Eco mode".
The UPS is operating in "CVCF 60 Hz mode".