Before Use; Front Panel - UNI-T UTE310 Quick Manual

Quick Guide

3.2 Before Use

Before using the instrument, do a quick inspection to check that the instrument is operating properly.
Please follow the following steps.
3.2.1 Key Inspection
Check whether the key can be pressed and popped up normally. If the key cannot operate
functionally, contact your UNI-T distributor.
3.2.2 Boot-up Inspection
The power supply voltage of the power meter is 100V~240V and the frequency is 50/60Hz. Connect
the power meter to the power supply by using the power cable in the accessory or other power cable
that conform to the standard of your country. When the power switch is pressed, the instrument will
turn on. If the instrument fails to power up properly, contact your UNI-T distributor for assistance.

4. Front Panel

This chapter is to introduce the front panel and its key function of the UTE310 digital power meter, as
shown in the following figure.
4.1 Key Function on Front Panel
Key
Instruments.uni-trend.com
Front Panel of UTE310
The power switch
ON/OFF: Press one time to turn on the instrument, press it again to shut down the instrument.
Common function key
This indicates the different functions according to the corresponding parameters of the display.
Function
UTE310 Digital Power Meter
12 / 38