Technical Index - UNI-T UTE310 Quick Manual

Quick Guide
This function can automatically select or change the range within the specified
range.
Load and access the external memorizer

The instrument can connect the external memorizer to save the data of voltage, current, power and harmonic. And it
can also export and import the configuration parameter of the instrument.
Built-in digital filter

The instrument has line filter and frequency filter function. The user can enable the line filter or frequency filter to
restrain unwanted noise and harmonic components during fundamental measurements.
PC analysis software

The software is used to remote control and set the UTE 310 digital power meter, for acquiring,
displaying, analyzing and saving the measured value, harmonic and waveform data.
Holding the maximum value

RMS/Peak of voltage and current, active power P, relative power Q and apparent power S.
Sampling frequency

The sampling frequency of the UTE310 is 1MHz.
Bandwidth

The bandwidth of the UTE310 is DC, 0.1Hz～300kHz.
25μA low current measurement

This function can accurately measure the stand-by power loss of the household appliance.
Input range of wide current sensor

50mV～10V, this sensor can be compatible with more sensors, and is very suitable for the power
consumption measurement of intermittent operation equipment.
Input range of wide current

25uA～20A
The data update interval can up to 0.1s

UTE310 digital power meter can freely set the data update interval: 0.1s, 0.25s, 0.5s, 1s, 2s, 5s, 10s,
20s, Auto, to meet the measurement needs of different frequency signals.

2.2 Technical Index

Model
Bandwidth
Sampling Rate
Voltage Range
Instruments.uni-trend.com
UTE310
DC, 0.1Hz～300kHz
1MHz
CF=3
15V
UTE310 Digital Power Meter
CF=6 or 6A
7.5V
8 / 38