Specifications; Cpap Specifications - Respironics REMstar Pro Service Manual

RESPIRONICS"
ANE
3.2 Specifications FUSES:
3.2.1 CPAP Specifications Fuses
ENVIRONMENTAL:
PHYSICAL:
Operating Temperature 41 to 95°F (5 to 35°C) Dimensions
Storage Temperature -4 to 140°F (-20 to 60°C)
Weight
Humidity (Operating / Storage) 15 to 95% non-condensing
ELECTRICAL:
NOTE: The outlet temperature rise can be as much as 18°F AC Input Voltage
(10°C) higher than room temperature measured at
the end ofa 6 ft. tube.
DC Voltage
Atmospheric Pressure 76.7 to 102 kPascals
AC Current Consumption
Chapter 3: Specifications, Features, Descriptions and Theory of Operation
There are no replaceable fuses.
912"x67/8"x4 1/2"
24cm x 17 стх 12 ст
<4 Ibs. (1.8 kg)
100 -240 VAC T 10%
47-63 Hz
11.5-14.5 VDC
1.0A maximum
Elevation 010 5500 ft. DC Current Consumption 3.0A maximum
. ο Power Consumption 80 VA maximum
Noise Level No specification is given because
various instruments, test procedures Type of Protection Class I] Equipment
and unit operating conditions produce | Against Electrical Shock 2-prong AC power inlet
varying results.
Degree of Protection Against Type BF Applied Part
Electrical Shock
1011170 REMstar Pro CPAP System 3-4