Respironics REMstar Pro Service Manual page 58

Chapter 6: Troubleshooting and Diagnostics
RESPIRONCS
대 Re ANETO ος m
Troubleshooting Table (Continued)
( Symptom Cause Verification Corrective Action 3
Pressure Offset - The delivered pressure is higher or | Perform power up process. * Check tubing for kinks.
Static pressure fluctuates from
・1.0 cm to+2.0 cm HLO.
lower than the set value by more
than -1.0 cm to +2.0 cm HO. + Replace the Main PCA.
No Stored Therapy Data SmartCard was not installed in unit | No therapy data after usage. * Depress the pressure on / off
prior to use. button before disconnecting the
Main AC power.
Nota Respironics SmartCard.
Card not formatted or faulty
SmartCard.
X A
1011170 REMstar Pro CPAP System 6-10