Service - Respironics REMstar Pro Service Manual

RESPIRONICS®
Warnings (Continued)
Oxygen supports combustion. Do not use oxygen in
the presence ofopen flames, cigarette smoke,
electrical spark, or other sources of ignition.
Device is not suitable for use in the presence of a
flammable anesthetic mixture with air or with
oxygen or nitrous oxide.
In situations where risk of contamination between
the user and the device is high (e.g.: sleep lab
devices; rental devices; users with respiratory
infections), a low-resistance, main flow bacteria
filter should be placed in-line between this device
and the circuit.
Most CPAP devices have the potential to induce
rebreathing of exhaled air. To reduce this potential,
use only Respironics circuit accessories, do not wear
the mask and headgear for more than a few minutes
while the unit is not operating, and do not block or
try to seal the vent holes in the exhalation port.
Chapter 2: Warnings, Cautions, and Notes
2.1.3 Service
Electronic components used in this device are
subject to damage from static electricity. Repairs
made to this device must be performed only in an
antistatic, Electro-Static Discharge (ESD) protected
environment.
To assure the safety of the service technician and the
specified performance of the device, Respironics
recommends that only technicians having prior
training or experience servicing ventilatory devices
perform any repairs or adjustments to the REMstar Pro
CPAP System.
High voltages are present inside this device. To
avoid electrical shock, disconnect the electrical
supply before attempting any repairs on the device.
2.1.4 Cleaning
To avoid electrical shock, disconnect the electrical
supply before cleaning the REMstar Pro CPAP System.
DO NOT immerse this device into any fluids.
1011170
REMstar Pro CPAP System
2-4