Set A Target Speed - Racelogic VBOX Touch Manual

Set a Target Speed

A Target Speed can be defined which will be displayed underneath the Speed value on the Speed
Screen, VMAX and Average Speed Screen.
You can choose whether to enable or disable an audible alert (continuous beep for 2 seconds) along with a visual alert
(all 4 LEDs will flash green) when the value is reached. Alerts will only show once, unless the vehicle has been
stationary since the last alert.
Enabling one, or both of the alerts will set the target speed and also allow you to access the sub menu where you
can define the target speed condition by pressing the value box and then using the keypad presented.
Target Speed Keypad Example
To save the value inputted, press the Confirm Button
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/Firmware_Updates_%E2%80%93_VBOX_Touch/
VBOX_Touch_Firmware_Version_1.4/02_Display_Modes_%E2%80%93_VBOX_Touch_Firmware_v1.4/VBOX_Touch_-
_Speed_Display_Mode
6