Speed Display - Average Speed Screen - Racelogic VBOX Touch Manual

Speed display mode

Hide thumbs Also See for VBOX Touch:

Table of Contents

Speed Display - Average Speed Screen

Formatted in two halves, the Average Speed screen displays both the Average Speed (since last boot up or power

cycle) and Distance Travelled (since last boot up or power cycle) on the same screen any time that movement is

detected. The average speed is displayed using either

continuous or moving

calculations.

The screen can be reset at any time by pressing the

Reset Button

at the bottom of the screen.

If a

Target Speed

is selected within the Speed Settings, it will be displayed in grey underneath the Average Speed.

https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/Firmware_Updates_%E2%80%93_VBOX_Touch/

VBOX_Touch_Firmware_Version_1.4/02_Display_Modes_%E2%80%93_VBOX_Touch_Firmware_v1.4/VBOX_Touch_-

_Speed_Display_Mode

Table of Contents

Do you have a question about the VBOX Touch and is the answer not in the manual?