Wolf L Series SO30F User Manual page 30

W O L F B U I LT- I N O V E N
S E L F - C L E A N
W O L F T I P S F O R S U C C E S S
For Self-Clean mode:
Before using Self-Clean mode, remove the
oven racks and oven rack guides. They will
discolor if left in the oven during this mode.
Remove broiler pan and any other utensil
stored inside the oven.
Remove any moist food or grease from
spillovers before starting this mode.
It is normal to see a brief flame-up, depend-
ing on the amount and content of the soil.
Use this mode as often as necessary. Do
not wait until heavy soil accumulates.
After the mode is finished and the oven
cavity cools, use a damp sponge or paper
towel to wipe up any ash.
You may hear a popping or "oil canning"
sound during the operation of the oven.
These sounds are normal and are caused
by the expansion and contraction of the
metal surfaces as they heat up and cool
down.
30
O P E R AT I O N
M O D E
S E T T I N G C O N T R O L S
For Self-Clean mode:
1) Remove all oven racks and rack guides
before using Self-Clean mode.
2) Touch desired oven ON.
3) Touch SELF CLEAN. The control panel will
automatically scroll the following message:
Please remove all oven racks and rack
guides before continuing. Press ENTER
to continue.
4) Touch ENTER to clear the message.
5) Touch ENTER again. Oven door will lock
and remain locked until oven has cooled to
below 300˚F (150˚C). The oven will automat-
ically set for 4 hours. Oven will self-clean
for 3 hours and cool down for 1 hour.
6) To combine this with Delayed Start
feature, refer to page 23.
7) Touch desired oven OFF to clear the display
when oven is finished cleaning.
Never wipe a warm or hot porcelain
surface with a damp sponge. It may
cause chipping or crazing (tiny hairlike
lines).