HOMCOM 821-025V70 Instruction Manual page 8

A. on/off switch: Press to turn the appliance on and off.
B. decrease/increase: Press to set the humidity or timer. The LED displays the 'Humidity' or
'Timer' value respectively. Hold + for three seconds. The display will show the temperature
value.
C. Press this button to set the shutdown time. The 'TIMER' indicator will turn on. Press + and
- to set a time between 0-24 hours. Each press will increase/decrease the time by one hour.
Once the timer is set, the remaining time will flash. If you keep pressing the button while the
time value is flashing, the value will reset to 0.
D. Fan Speed: Press to adjust the fan speed between high and low. The corresponding
indicator will turn on to indicate the selected speed.
E. Mode: Keep pressing this button to cycle through the different modes, which are: 'DRY
CLOTHES', 'NORMAL OPERATION', 'AIR CIRCULATION' and 'AUTOMATIC'
The relative indicator is truned on.
F DRY CLOTHES indicator
G NORMAL OPERATION indicator
H AIR CIRCLUATION indicator
A
I AUTOMATIC indicator
J DEFROST indicator: When the indicator lights up, the unit is in the defrosting function. The
fan will work. The compressor will be off.
K HIGH Fan Speed indicator;
L LOW Fan Speed indicator;
M TIMER indicator;
N TEMPERATURE indicator: When it glows, 88LED displays room Temperature value.
O HUMIDITY indicator: When it glows, 88LED displays the current humidity value in the
room.
P TARGET HUMIDITY indicator: When the room humidity reaches the SET RH value, the
indicator glows.
Q TANK FULL indicator: When the water tank is full, the indicator glows. The unit will stop
working. It will work again after the tank is emptied.
R POWER indicator: The indicator will glow when the unit is on. The indicator will flash when
the unit is on standby.
7