Download Print this page

Water Tank - HOMCOM 821-025V70 Instruction Manual

Advertisement

!
Never plug or unplug the appliance with wet hands.
!
Before cleaning and maintenance, turn off and unplug the
appliance.
Do not remove the float lever from the water tank.
When the unit is not in use for long periods
1. Unplug the unit, coil the power cord and hang it at the back of the unit as shown.
2. Empty the tank and wipe it down with a cloth. Then, place it back into the appliance.
3. Clean the filter.
4. When storing the appliance, keep it upright and out of direct sunlight.
Note
To avoid malfunction or abnormal sounds, keep the unit upright.
Body of Dehumidifier
Wipe the dehumidifier with a dry and soft cloth.
To remove dirt, wipe the appliance with a slightly damp cloth.
Never use a wet cloth for cleaning the controls.
To avoid damaging the surface, avoid using benzine, thinner or
liquid cleaners.
Do not use chemicals for cleaning the appliance.

Water tank

Remove the water tank from the appliance.
Wash the inside of the tank with water.
Strong brushes may scratch the tank.
Do not remove the float lever from the tank.
Dry the outside of the tank with a cloth, then place it back into
the appliance.
12
.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 821-025V70 and is the answer not in the manual?

Questions and answers

TREVOR A CATTELL
January 16, 2025

How to adjust humidity settings

1 comments:
Mr. Anderson
February 3, 2025

To adjust the humidity settings on the HOMCOM model 821-025V70 dehumidifier:

1. Use the decrease (-) or increase (+) buttons to set the desired humidity level.
2. The LED display will show the selected humidity value.
3. Hold both the + and - buttons for three seconds to display the temperature value if needed.

This answer is automatically generated