Download Print this page

HOMCOM 821-025V70 Instruction Manual page 5

Advertisement

Do not place drinks or anything else on top of the appliance.
If water gets inside the appliance, it will cause damage and could create a fire
hazard.
Do not use this dehumidifier for purposes other than its intended use.
Never use this dehumidifier near oil, flammable gas or chemicals.
For continuous draining, make sure the drain hose is correctly positioned without
any upward slopes.
Ensure heating appliances are not exposed to the airflow generated by this
dehumidifier.
Do not sit on the dehumidifier or use it as a footstool.
For safety purposes, unplug the appliance when not in use for long periods.
Grasp the plug firmly when unplugging the appliance. Do not pull the cord.
Keep small children away from this appliance whilst in use.
Do not remove the float lever from the water tank.
When moving the appliance, do not pull the power cord to avoid damaging it.
Do not block the air intakes and outlets. Do not cover the appliance with clothes,
towels or anything similar.
After using the appliance for long periods, we recommend checking the filter, drain
hose and other parts to ensure they are clean.
Before cleaning and maintenance, turn off and unplug the appliance.
To avoid electric shock, do not submerge the appliance in water.
Before moving, turn off the unit and empty the tank.
4
Prohibit
Prohibit
Prohibit
Prohibit
!
Ensure drain
hose
Prohibit
Prohibit
Prohibit
Prohibit
Prohibit
Prohibit
!
Schedule
check out
Prohibit
!
Shut off
operation and
drain water
when moving

Advertisement

loading
Need help?

Need help?

Do you have a question about the 821-025V70 and is the answer not in the manual?

Questions and answers

TREVOR A CATTELL
January 16, 2025

How to adjust humidity settings

1 comments:
Mr. Anderson
February 3, 2025

To adjust the humidity settings on the HOMCOM model 821-025V70 dehumidifier:

1. Use the decrease (-) or increase (+) buttons to set the desired humidity level.
2. The LED display will show the selected humidity value.
3. Hold both the + and - buttons for three seconds to display the temperature value if needed.

This answer is automatically generated

Subscribe to Our Youtube Channel