Advertisement
Setting up the 'air cleaner' filter
1.Remove the filter holder from the front cover.
2. Toinstall the filter ontothe back cover:
• Remove the 'air cleaner' filter from the polyethylene bag.
• Place the filter onto the back filter.
• Align the 'air cleaner' filter with four catches on the back cover,
then secure it in place.
• Take the filter holder and position it on top of the cover, with the
flat surface facing up.
• Attach the filter holder to the four catches on the cover,
ensuring the convex portions of the holder are facing upward.
To set the holder securely, press its perimeter with your fingers.
Then check the condition
If the settings are not properly configured, you will be unable to attach the back
cover to the unit.
Make sure that the water tank is set properly.
This appliance does not work when the tank is full or not fitted properly.
How to remove
Pull the water tank gently toward you by holding the concave part of the tank.
How to set
Push the tank horizontally and gently.
9
Advertisement
Need help?
Do you have a question about the 821-025V70 and is the answer not in the manual?
Questions and answers
How to adjust humidity settings
To adjust the humidity settings on the HOMCOM model 821-025V70 dehumidifier:
1. Use the decrease (-) or increase (+) buttons to set the desired humidity level.
2. The LED display will show the selected humidity value.
3. Hold both the + and - buttons for three seconds to display the temperature value if needed.
This answer is automatically generated