Ulvac DA-60D Instruction Manual page 9

!
Caution
Operation
(4) Touching rotating components (eg motor, main shaft, axial joints, cooling fan) while the
pump is in operation may result in injury.
(5) The overload protector operates when the pump becomes excessively hot. Touching it in
this condition may result in burns.
(6) Touching the motor while the pump is in operation or while it is still hot immediately
after having been switched off may result in burns.
(7) Do not insert fingers or objects into, or peer into, the inlet or outlet during operation.
Maintenance and Repair
(8) If the pump ceases operation, turn power OFF (set switch to O) immediately to prevent
accidents, remove the power cord from the wall outlet, and contact your dealer or the
manufacturer for inspection and repair.
(9) Leave the pump for at least 30 minutes until it has cooled, and begin operation again.
Touching the pump immediately after it has stopped may result in burns.
０６