Safety Instructions - Compac EP 100 D G7 Operation Manual

Safety instructions

The work press is intended only for normal shop use and not as a production press.
The press's maximum load is stated in the CE certificate and on the press's product label.
When operating the press, the following means of protection must be used:
Protective footwear –
Safety shoes with steel
toe-caps
The foot must not rest on cross members or columns.
•
The press must be secured to a flat, strong floor.
•
The electrical connection must be performed by a certified electrician.
•
Never make any alterations to the product's construction.
•
Do not use the press in a way that exceeds its intended use and capacity.
•
The press must not be used if it is damaged, leaking oil, or if the unit is functioning in a way that is
different from the description in the operation manual. If this is the case, stop using the press
immediately, contact an authorized service technician for full inspection and, if necessary arrange
repair, so that the press may be used safely again.
•
The table must not be raised or lowered if v-blocks, tooling or other equipment is sitting on the
table.
•
For all pressing operations, the table must be supported by both pins, and wire/winch must be
slack.
•
V-blocks or other tooling must be correctly positioned on the press table before use.
•
The press should be visually inspected prior to each use. Check for broken, cracked or bent parts,
or loose or missing parts, and any other condition which could affect its proper and safe operation.
•
Assess the risk of any work-pieces being ejected during use.
•
Keep at an appropriate, safe distance from the press/work-piece whilst using the press.
•
When operating the machine, make sure that hands and other body parts are not at risk of
becoming trapped.
•
The operator should not use the press with others standing near the controls, or if they are in
danger of being hit by objects or tooling..
•
Any inspection must be carried out by a qualified individual at least once a year.
•
Use only original spare parts for safe and reliable operation.
•
Make sure that all warning and information signs on the product are legible and intact at all times.
(EN)
EP100D G7 XXX (EN)_Midlertidig_SN.docx
Failure to observe the following may result in serious body injury or death, as
well as possible damage to property.
Safety goggles
Knowhow is the difference
Work gloves
12/31 2019-09-18 SN