Table of Contents
Advertisement
Periodic maintenance and inspection
Annual service and daily use
The press should be serviced annually in accordance with this operating manual.
It is always important that the operator makes a note of any machine irregularities, together with any
damage or faults which arise during use. These should be reported immediately to their supervisor,
and in this way all faults can be remedied before further work continues.
Only persons certified in professional repair and maintenance of hydraulic equipment may perform the
following service and maintenance of the Compac press.
Use only original parts from Compac.
Procedure for annual inspection and inspection in case of irregular operation.
Points of action are shown in the following illustration.
1. Identify the press
2. Test equipment
(EN)
EP100D G7 XXX (EN)_Midlertidig_SN.docx
With daily and annual service
Based on the rating plate, identify the press capacity, model and date of
manufacture.
If the factory-supplied documentation is missing, it is possible to find spare
parts drawings and lists with spare parts numbers and guidelines via our
Web site: www.compac.eu.
If the products are not from the current range, please see under
"Discontinued models".
Use only original parts from Compac.
Preparation of service inspection
To ensure the accuracy of the press manometer, it can be removed and sent
away for recalibration. Once remounted, the press is now ready for service
inspection.
Knowhow is the difference
22/31
2019-09-18 SN
Advertisement
Table of Contents
